Description
Airgun Capital Falcon 1.25″ × 5″ Airgun Suppressor
The Airgun Capital Falcon 1.25″ × 5″ Airgun Suppressor is designed for shooters who want a lightweight, compact airgun moderator without sacrificing internal baffle performance.
The Falcon uses Airgun Capital’s slimmest suppressor body and weighs only 139 grams.
It is CNC-machined from 6061-T6 aluminum, finished in matte black hard anodizing, and built to match the selected caliber and thread pitch.
Each Falcon ships ready to thread directly onto a compatible airgun.
Compact and Lightweight Airgun Suppressor
The Falcon measures approximately 5 inches long and just 1.25 inches in diameter.
Its compact dimensions and low weight make it a strong option for shooters who want to minimize muzzle weight.
Airgun Capital specifically lists the Falcon for:
- PCP plinking rifles
- Springers
- CO2 pistols
- Field target setups
- Small-game hunting builds
.177 Through .30 Caliber Compatibility
The Falcon is designed for .177, .22, .25, and .30 caliber air rifles and pistols.
Available caliber configurations include:
- .177 / .22
- .22 / .25
- .25 / .30
Each Falcon includes a caliber-matched front endcap.
Airgun Capital states that the exit bore is sized to approximately 1 mm larger than the projectile diameter.
Five-Baffle Internal Stack
The Falcon uses a five-baffle internal stack.
Each removable aluminum baffle is sized for the selected caliber configuration.
The five-baffle design gives the Falcon substantial internal sound-reduction capability despite its compact body.
CNC-Machined 6061-T6 Aluminum
The Falcon is constructed from 6061-T6 aluminum.
Its outer shell is CNC machined, and the baffles, front endcap, and base cap are also made from aluminum.
Airgun Capital describes 6061-T6 aluminum as lightweight, corrosion resistant, and durable.
Matte Black Hard-Anodized Finish
The Falcon features a matte black hard-anodized finish.
This provides a clean appearance while protecting the aluminum exterior.
Four Thread Options
The Falcon is available in four thread pitches:
- 1/2-20 UNF
- M14 × 1.25
- M18 × 1
- M20 × 1
Airgun Capital identifies 1/2-20 UNF as the most common thread on U.S.-market airguns.
Always verify your airgun’s muzzle thread before ordering.
Direct-Thread Installation
Each Falcon includes a threaded base cap matched to the selected rifle thread pitch.
When the correct configuration is selected, the suppressor threads directly onto the airgun without requiring an adapter.
If your airgun uses another thread pitch, an adapter may be required.
Fully User-Disassemblable
The Falcon can be completely disassembled without tools.
The threaded front endcap can be removed by hand, allowing the five-baffle stack to be removed for inspection and cleaning.
Sound Reduction
Airgun Capital states that the Falcon provides significant reduction in muzzle report across most airgun platforms.
Actual results vary depending on:
- Airgun
- Caliber
- FPE
- Shroud configuration
Performance therefore depends on the specific airgun setup.
KEY FEATURES
- Airgun suppressor / moderator
- 1.25″ × 5″ body
- 127 mm listed length
- 31.75 mm diameter
- 139 g weight
- .177 through .30 caliber compatibility
- Three caliber configurations
- CNC-machined construction
- 6061-T6 aluminum
- Matte black hard-anodized finish
- Five removable aluminum baffles
- Caliber-specific baffle stack
- Caliber-matched front endcap
- Approximately 1 mm projectile clearance
- Threaded aluminum base cap
- Four thread options
- Direct-thread installation when properly matched
- Full tool-free disassembly
- Lightweight design for reduced muzzle weight
| Specification | Details |
|---|---|
| Manufacturer | Airgun Capital |
| Model | Falcon |
| Product Type | Airgun Suppressor / Moderator |
| Body Size | 1.25″ × 5″ |
| Length | 127 mm |
| Diameter | 31.75 mm |
| Weight | 139 g |
| Material | 6061-T6 Aluminum |
| Construction | CNC Machined |
| Finish | Matte Black Hard Anodized |
| Baffle Count | 5 |
| Baffle Material | Aluminum |
| Baffle Design | Removable, Caliber-Specific |
| Front Endcap | Threaded Aluminum, Caliber-Matched |
| Exit Bore | Approximately 1 mm Projectile Clearance |
| Base Cap | Threaded Aluminum, Matched to Selected Thread Pitch |
| Disassembly | Full Tool-Free Disassembly |
| Caliber Range | .177 Through .30 |
| Caliber Options | .177/.22, .22/.25, .25/.30 |
| Thread Options | 1/2-20 UNF, M14 × 1.25, M18 × 1, M20 × 1 |
| Airgun Included | No |
Frequently Asked Questions
What is the Falcon 1.25″ × 5″ Airgun Suppressor and what does it do?
The Falcon is a lightweight, compact airgun suppressor designed to reduce muzzle report while maintaining strong internal baffle performance. It uses a five-baffle internal stack and a caliber-matched front endcap to tailor performance for specific airgun setups.
What calibers and configurations are available for the Falcon?
The Falcon supports .177, .22, .25, and .30 calibers with three caliber configurations: .177/.22, .22/.25, and .25/.30. Each unit includes a caliber-matched front endcap.
How do you maintain or disassemble the Falcon?
The Falcon is fully user-disassemblable and can be taken apart without tools. The front endcap unscrews by hand, allowing the five-baffle stack to be removed for inspection and cleaning.
What threading options and installation method are supported?
The Falcon offers four thread options: 1/2-20 UNF, M14 × 1.25, M18 × 1, and M20 × 1. It uses direct-thread installation when the matched thread pitch is selected. An adapter may be required for other thread pitches.
What are the key physical specifications and materials used in the Falcon?
The Falcon measures approximately 5 inches long and 1.25 inches in diameter, weighs 139 g, and is CNC-machined from 6061-T6 aluminum with a matte black hard-anodized finish. It uses a five-baffle aluminum stack with caliber-specific components.
